Hello all,
From reading the posts, I know that some of you (Tom, Mike) have used something like an Amperite 6N030 to control a B+ delay circuit. I ordered some from AES because they're cheap ($4 each).
After hours of Googling around I couldn't find any spec sheets for these. Does anyone know if they're single pole or double pole and what their current ratings are? The link to Amperite shown on some of the older posts is broken.
If I can switch two B+ circuits at 400v 200ma from a single tube, great. If not, I can set up one or more relays with 12vdc coils and probably do the same thing, but would prefer to keep it as simple as possible.
Any comments? As always, thanks.
Chris