So this is how I want to mount my chassis.
http://jason43.myphotoalbum.com/view_ph ... d=IMG_1803
1. Transformers in back. ( Power on left, output on right)
2. PCB mounted underneath (On right looking down from top as in picture)
3. GZ34 socket farthest to left.
4. KT88's to the right of the GZ34.
5. On/Off switch front left in front of GZ34.
6. Triode switch ( In front or back between the KT88's)
* Does anyone forsee any problems with the mounting positions?
I think it would look cool having all five tubes up front glowing on the same plane.