by DeathRex » Mon Jun 15, 2015 6:18 pm
I'm hoping to build a PPP 6GB5 amp. The amplifier is pretty much a Poseidon with a LM334 in the phase splitter (they have them at mouser again), using a 6N1P and a 6N2P in front of it, inplace of the 12AX7. It also has Morgan Jones tone controls with a 6EJ7, and a 6N23P in front for a buffer. So 6N23P - 6EJ7 - 6N2P - 6N1P - 6GB5. So nothing has gain until the 6N2P, and I was wondering if I could configure the 6N23P to give a little gain 2 or 3 times and get a low impedance into the tone controls. I'm thinking the middle of the bass and treble controls of a Baxandall type are equivalent to ground, so the impedance of the stage would be about 33K to ground.
At first I wanted to be a ET. Now I are one.