Have any of you made your own audio output transformer, or rewound an existing one to suit your needs?
Joe
Making or rewinding an Audio Output Xfmr
3 posts
• Page 1 of 1
Making or rewinding an Audio Output Xfmr
by joeztech » Fri Sep 12, 2014 8:57 am
- joeztech
- Posts: 39
- Joined: Mon Aug 18, 2014 5:06 am
Re: Making or rewinding an Audio Output Xfmr
by Shannon Parks » Sat Sep 13, 2014 5:09 pm
Patrick Turner in Oz has a great write-up here:
http://www.turneraudio.com.au/output-trans-theory.htm
Also get Radio Designer's Handbook 4th Ed. Here's a PDF from Pete Millett:
http://www.tubebooks.org/Books/RDH4.pdf
Great reading and theory, even if you didn't ultimately tackle it.
Shannon
http://www.turneraudio.com.au/output-trans-theory.htm
Also get Radio Designer's Handbook 4th Ed. Here's a PDF from Pete Millett:
http://www.tubebooks.org/Books/RDH4.pdf
Great reading and theory, even if you didn't ultimately tackle it.
Shannon
- designer of fine tube audio gear at (((parks audio)))
- founder and admin of the diytube forums
-
Shannon Parks - Site Admin
- Posts: 3764
- Joined: Tue Mar 18, 2003 5:40 pm
- Location: Poulsbo, Washington
Re: Making or rewinding an Audio Output Xfmr
by joeztech » Sun Sep 14, 2014 4:10 am
Shannon;
Thanks for those references. I will research them.
Have a great day!
Joe
Thanks for those references. I will research them.
Have a great day!
Joe
- joeztech
- Posts: 39
- Joined: Mon Aug 18, 2014 5:06 am
3 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 53 guests