Page 2 of 2
Posted:
Sat Aug 01, 2009 10:21 pmby Sal Brisindi
There are a few vendors on ebay selling them, I just bought 10 for $8 with free shipping.
Sal
Posted:
Sun Aug 02, 2009 2:36 amby Wiesiek Lipowski
On mine, I can read (from the top to the bottom):
ST (in italics)
LM
334
L706
It's a TO-92 type.
Greetings
Posted:
Thu Jan 12, 2012 10:58 amby Aljaheejus
Posted:
Thu Jan 12, 2012 12:57 pmby K4ECA
Yes, you could use the above parts, I think this one is the one on the parts list: 926-LM334Z/NOPB
As of the time of this post Mouser shows quantity: 2200 in stock, ready to ship.
The parts that include (-3) and (-6) have a larger temp. error.
Posted:
Fri Jan 13, 2012 7:17 amby Shannon Parks
Glad to see these are back in stock at Mouser. I would suggest the 926-LM334Z/NOPB, as you won't really gain anything with the LM234Z parts in this application.
Shannon
Posted:
Fri Jan 13, 2012 6:11 pmby K4ECA
It may have been covered elsewhere, but Mouser has added National Semi to it's line card.
Posted:
Fri Jan 13, 2012 8:09 pmby WA4SWJ
National Semiconductor was recently acquired by Texas Instruments and there is some shifting around going on among their distributors. Glad to see National's parts at Mouser.
Regards,
Posted:
Sat Jan 14, 2012 6:14 amby Shannon Parks
K4ECA wrote:The parts that include (-3) and (-6) have a larger temp. error.
Noticed that these have a lower max voltage than the LM334Z at only 30V instead of 40V. So I would steer clear and use the LM334Z. We tube guys need every bit of working voltage we can get!
Shannon