Hello all,
Being squeezed for living room space by my better half, I've decided to design and build an integrated tube amp from scratch using a bunch of Dynaco parts I've accumulated over the years.
I've got A-431 and P-782 trannies, a couple of Sheldon's cap upgrade boards from Triode, the Poseidon PCB's (yet to be stuffed), and all the Curcio upgrade stuff for the PAS3 (bought already assembled on eBay).
The nice thing here is that I can design the chassis/layout/panel from the ground up, but that's the easy part. Integrating all the electronics is somewhat difficult because they assume a stock Mark or PAS. So, my first job is to draw up a comprehensive schematic, starting with the power supply.
Since this project may be of interest to others, and since I would surely appreciate any critique and advice, I'd like to post my first PDF file to this board. All the information has been pulled from publicly available sources so there shouldn't be any copyright issues.
If there's any interest, please let me know and, especially, explain to me how to post PDF files properly to this board. I don't think you'd want me to insert an 8/12x11 pdf file into this text (if that even works?).
Regards, ChrisK