by FATMAN » Sun Nov 02, 2008 5:34 am
The pictures were from the first day, I have changed the flying conection and installed a 4 way terminal lug to hold the conection with the red black tranformer tap to the diode,( moved it from the corner of the cap board) I will need to lift the Transformer to put the screws to hold the chokes, I will learn these little things before I start the second one. I wonderd about the milar film cap too,I was not sure it was the right spot for it,but it measured .02mf so I used it there. It came in the bias control kit they sent. (Who is Uncle Ned?) Yes the horns can go very loud but that's not the main objective, the larger the horn the smoother and more full the sound is, the lower you can play them and still have a very full rich bass,even at the lowest levels. Yes can't wait for the chokes now that they are so close! it has been over 2 years for me to finally get this far with the dynaco's. It should be a lovely new pair of vintage MK3's, Glad there are those who keep them alive and better than ever.